Microfiber Paint Roller Covers | BEHR® Microlon® | Behr

BEHR® Microlon®
Roller Covers

Avg. Rating:

BEHR® Microlon® rollers combine the high carrying capacity of a traditional microfiber roller and the ultra-smooth finish of a traditional woven roller. Specifically engineered to use with all paints and stains on smooth to semi-smooth surfaces. Rollers are constructed with a double-thick polypropylene core that resists water, solvents, and cracking.

Click Here to find out if BEHR Microlon rollers are available in a Home Depot® nearest you.

3 pack of microlon rollers

Finish

Resists shedding for an ultra-smooth finish.

Best For Use In

7/16-inch nap is ideal for walls, ceilings, and floors with smooth to semi-smooth surfaces.

Coverage

Holds more paint for excellent coverage.

PRODUCT USAGE
  • Pre-wet roller cover before use. This will help prime the roller for paint and remove any loose fibers from the roller cover. To pre-wet, dip roller cover into a water-filled bucket or lightly run it under the sink. Attach it to your paint frame and spin out the water until the roller cover is slightly damp. Always pre-wet roller covers with the same type of liquid you use on your project. Pre-wet with water for water-based coatings and pre-wet with mineral spirits for oil-based coatings.
  • To load, firmly roll the roller into the well of the paint-filled tray and back to the roll off area. Repeat this back and forth motion until the roller is sufficiently coated and just short of dripping.
  • To paint, begin in corner, by making a “V” figure 1 ½ feet by 2 feet. Go back and fill in “V”, then continue working from dry into wet areas. While painting, maintain a wet edge and apply minimal pressure to the roller to ensure the roller does not dry out.
  • Once a section is complete, lightly back roll to lay off the paint and create a consistent finish across your project.

To Clean:

  • Remove cover from frame immediately after use.
  • WATER-BASED PAINTS: Wash in warm soapy water, rinse, dry.
  • OIL-BASED PAINTS: Rinse in recommended solvent. Wash in warm soapy water, rinse, dry. DO NOT SOAK IN WATER OR SOLVENT.

Read More

Specifications:

  • Roller Length: 9"
  • Nap Size: 7/16"
  • Fabric Type: Microfiber
  • Surface Type: Smooth & Semi-Smooth
  • Ideal Projects: Walls, Ceilings & Floors
  • Paint Type: All Paints & Stains

Read More

Read More

Reviews

CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot