Fast Drying Water-Based Poly Urethane | Behr

BEHR Premium® Fast-Drying Water-Based Polyurethane

Avg. Rating:

BEHR Premium Fast Drying Water-Based Polyurethane is a clear protective finish that shields your interior wood surfaces that are stained with BEHR Premium Water-Based Wood Stain. This durable polyurethane is designed to prolong the life of your wood surface and create a smooth, lasting finish. This product enhances the look and color of your wood surface, allowing its true beauty to shine through. Multiple sheens are available depending on your desired look.

See Our Selection of Water-Based Wood Stains and Finishes

1 gallon can of Behr Premium Fast Drying Water Based Poly Urethane, interior

Finish

Available in Matte, Satin, Semi-Gloss, and Gloss Finish

Best For Use In

Properly prepared interior bare or stained wood surfaces such as furniture, moldings, cabinets, trim, doors and residential hardwood floors.

Coverage

125 Sq. Ft./ Qt.

PRODUCT USAGE
  • Icon of hand sanding surface with sanding block

    Prep
    Before Use

  • Icon of paint brush applying paint

    2 Coats Required
    3 Coats if Desired

  • Icon representing length and width dimensions to determine square footage

    Spread Rate: 
    125 Sq. ft./Qt.

  • Icon of cleaning paint brush under water faucet

    Clean-Up
    Soap & Water

CAUTION: Top coated surfaces may be slippery when wet.

Surface Preparation

  • For refinishing, remove all wax or cleaner build-up with a wax stripper or degreaser prior to sanding.
  • Sand all surfaces in the direction of the wood grain to desired smoothness
  • DO NOT USE steel wool. 
  • Remove all dust from sanded surfaces and clean with a tack cloth.

Read More

Application

  • Do not shake or thin. 
  • Do not apply in direct sunlight or in temperatures below 55°F (10°C) or above 90°F (32°C).
  • Stir thoroughly prior to and during use.
  • If wood stain color is desired, apply BEHR® Wood Stain. Follow all label instructions.
  • Using a high-quality nylon/polyester bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess.
  • Apply a thin, even coat following the direction of the grain making sure to maintain a wet edge.
  • To minimize the brush marks and bubbles after staining application, tip off the surface by holding the brush at a 45-degree angle and lightly run the bristles over the entire length of the wood.
  • Floor Application: use a synthetic pad applicator or bristle brush and maintain a wet edge to avoid lap marks.
  • For maximum durability, 3 coats are required.
  • Do not puddle, over-brush or overlap finishes.
  • Sand lightly between coats with fine sandpaper.
  • Remove all dust prior to applying additional coats.

Read More

Dry Time

  • Dries to touch in 1 hour.
  • Sand or Recoat: 1 hour.
  • After the final coat, allow 12 - 24 hours before light use.
  • Fully cured: 3 days after the final coat.

Read More

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service

Read More

Read More

Reviews

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot