Premium Semi-Transparent Waterproofing Wood Finish Oil | Behr

BEHR PREMIUM® Semi-Transparent Waterproofing Wood Finish Penetrating Oil

Avg. Rating:

BEHR Premium Semi-Transparent Waterproofing Wood Stain & Sealer is a penetrating oil-based stain that beautifies and protects your exterior wood surfaces. This product is available in popular exterior premix colors and can also be tinted to a range of other exterior colors. This product is ideal for both horizontal and vertical surfaces. After application, this product will resist rain after 4 hours which provides project flexibility during unsure weather conditions.

 

1 gal can of Behr Premium Semi-Transparent Waterproofing Stain and Sealer Penetrating Oil

Finish

Creates a Semi-Transparent Finish that enhances the natural beauty of the wood.

Best For Use In

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.

Coverage

Up to 400 Sq. Ft. per Gallon depending on wood porosity.

PRODUCT USAGE
  • Paint prep icon

    Must Prep
    Before Applying
    Wood Finish

  • Pad applicator icon.

    1 Coat Application

  • Wood square feet coverage icon

    Spread Rate:
    **Covers 350-400 Sq. Ft. per Gallon
    depending on wood porosity

     

  • Mineral Spirits Icon

    Clean-Up:
    Mineral Spirits
    or Paint Thinner

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences and Wood Patio Furniture.

Preparation† (Proper surface preparation is required.)

  • For failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM No. 63 All-In-One Wood Cleaner to neutralize the wood.
  • When No. 64 is not needed, a product such as No. 63 MUST be used to remove mill glaze and clean the wood surface. After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer. When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface.
  • Allow the area to dry at least 24 hours before coating.
  • Lightly sand to remove remaining wood fibers/fuzz. See behr.com for additional product information.

Read More

Application

 
  • Must apply between 40-90˚F (4.5-32˚C).
  • *Do not apply if rain is expected within 4 hours of product application. Resists rain 4 hours after application.
  • The surface must be completely dry before application.
  • For multiple gallons, combine into a larger containers for color uniformity.
  • DO NOT THIN PRODUCT. Stir product occasionally throughout the application.
  • Test product for penetration and color on a small hidden area before proceeding.
  • Use a natural bristle brush for areas requiring more accuracy. The use of rollers should be limited to rough surfaces only. Use 3/8" nap or longer when appropriate.
  • A high-quality pump sprayer with a variable tip or an airless sprayer with a .013"-.017" tip (60 mesh filter) may be used.
  • If thinning is necessary for spray application, then use a VOC compliant paint thinner at a rate of up to 8 oz. per gallon. • Lightly saturate the surface and back-brush any excess finish.
  •  Be sure to eliminate puddling and evenly distribute the finish. Maintain a wet edge when applying.
  • Apply product end-to-end or to board lengths to prevent lap marks. Avoid applying finish too heavily.
  • One coat application. For optimum performance, coat all accessible sides.

Read More

Maintenance

  • When the color has faded and water is readily absorbed by the substrate, prep/clean with a product such as BEHR PREMIUM No. 63, allow to dry, and apply a new/fresh coat of wood finish.
  • Product can be applied annually if needed.

Read More

Dry Time

  • Dry to touch after 2-4 hours depending on wood porosity. 24 hours before foot traffic. 72 hours for full cure.

Read More

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

Read More

Read More

Reviews

SDS AND DATA SHEET

1 gal can of Behr Premium Semi-Transparent Waterproofing Stain and Sealer Penetrating Oil
BEHR PREMIUM® Semi-Transparent Waterproofing Wood Finish Penetrating Oil
See Full SDS, Product Data & Safety

WARRANTY

LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory.  Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot