Solid Color Waterproofing Wood Stain | BEHR® DECKplus® | Behr

BEHR® DECKplus® Solid Color Waterproofing Wood Stain

Avg. Rating:

Whether you're looking to make a simple color change, complement existing color or hide blemishes on aging wood, protect and beautify with BEHR's Solid Color Waterproofing Wood Stain. This 100% acrylic formula seals out water and blocks the sun's harmful UV rays for up to five years on decks and up to 15 years on fences and siding, and is available in more than 1,600 custom colors to help you get just about any look you can imagine.

See Our Selection of Solid Colors.

ALWAYS ADD TINTING COLORANTS BEFORE USING. FOR BEST RESULTS, APPLY SECOND COAT THINNER THAN FIRST COAT.

1 gal can of Behr DeckPlus Solid Color Waterproofing Stain

Finish

Creates a Solid Color film that hides wood imperfections while allowing wood texture to show through.

Best For Use In

For properly prepared new to heavily weathered or cracking wood surfaces (0 to 15+ years exposure).

Coverage

1st Coat 200-400 Sq.Ft.
2nd Coat 400-800 Sq. Ft.

PRODUCT USAGE
  • Paint prep icon

    Must Prep
    Before Staining

  • Two paint rollers, two coat icon.

    2 Thin Coats
    Recommended

  • Spread rate icon

    Spread Rate:
    1st Coat
    200-400 Sq. Ft
    2nd Coat
    400-800 Sq. Ft.

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

Recommended for properly prepared new to heavily weathered or cracking wood surfaces (0 to 15+ years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences, Wood Patio Furniture and Composites.

Preparation

  • Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
  • BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood. When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus.
  • Rinse thoroughly and allow to dry before coating.
  • On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood.
  • Lightly sand to remove remaining wood fibers/fuzz.

Read More

Application

  • Must apply between 40-90˚F (4.5-32˚C). Do not use if rain is expected within 24 hours.
  • The wood surface must be completely dry before application.
  • No primer needed on most woods. However, Redwood, Cedar, Cypress and other "bleeding" woods contain water soluble extractives which may cause discoloration of white and pastel colors; therefore prime the above type woods with one coat of a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer. See label for additional instructions.
  • Intermix multiple containers to ensure color uniformity. Stir product occasionally throughout application.
  • Use a 3/8” nap roller, nylon/polyester brush, pad applicator or airless sprayer. Airless spray is recommended for experienced applicators only; use a .015 - .019" tip.
  • If thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Maintain a wet edge when applying.
  • Always back-brush and apply product end to end or to board lengths to prevent lap marks.
  • Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily.
  • For optimum performance, coat all six sides of wood.

Read More

Dry Time

  • 1-2 hours before recoat. Wait 24-48 hours before light foot traffic. 72 hours for full cure.

Read More

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

Read More

Read More

 

4 Common Myths About Wood Cleaners

No need to use

I don’t need to use a wood cleaner

Not only does a wood cleaner remove dirt and mildew stains prior to coating, but it actually opens the pores of the wood for the coating to properly adhere to the surface.

Notes

I can complete my project without it

Properly cleaning the wood actually saves time in the long run by improving the longevity and durability of the stain.

Tools

It requires extra tools I don’t have

All you need is a water source and a stiff bristle brush to effectively clean a wood surface with wood cleaner. Follow all instructions.

Search

Using a wood cleaner is complicated

If you’ve ever washed a car, then you can clean a wood surface with a wood cleaner!

Product CAN Color wheel

Reviews

SDS AND DATA SHEET

1 gal can of Behr DeckPlus Solid Color Waterproofing Stain
BEHR® DECKplus® Solid Color Waterproofing Wood Stain
See Full SDS, Product Data & Safety

WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 15 years on vertical surfaces and 5 years on horizontal surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS.  Color fading and slight natural graying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot