AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PREMIUM® Semi-Transparent Decorative Concrete Stain No. 855

Avg. Rating:

The BEHR PREMIUM No.855 Semi-Transparent Decorative Concrete Stain provides a unique decorative finish for your concrete surfaces. It can achieve the look of an acid stain finish or semi-transparent concrete stain. It is a household chemical and weather resistant finish with easy water clean-up. Easy to use with spray-on or roll-on application. It provides a natural stone-like appearance. It is available in popular custom colors and can create unique color combinations.

1 gal can of Behr Premium Decorative Concrete Stain, semi-transparent

Technical Data Sheets

Safety Data Sheets

Finish

Flat finish.

Best For Use In

Uncoated and unsealed, properly prepared Interior or Exterior concrete surfaces.

Coverage

Spray Application: Base Coat: 175-250 Sq.Ft.
Accent Coat: 350-500 Sq.Ft.
Roller Application: 250-500 Sq.Ft

PRODUCT USAGE
  • Concrete square feet coverage icon

    Spray Application: Base Coat:
    175-250 Sq.Ft.
    Accent Coat:
    350-500 Sq.Ft.
    Roller Application: 250-500 Sq.Ft.

  • Clock icon

    Dry Time:
    1 Hour Dry to Touch
    4 Hours Recoat

  • Soap and water cleaning a paint brush icon

    Clean-Up:
    Soap & Water

  • Thermometer Icon

    Protect
    from Freezing

** Light and pastel-colored concrete stains should be used over pool deck surfaces. DARK COLORS RETAIN HEAT.

Preparation† (Proper Surface Preparation is Required.)

  • All surfaces must be clean, sound, dry uncoated and free of any dirt, oil and grease. 
  • New concrete must cure for a minimum of 30 days. 
  • Use a paint stripper to remove any previous coatings or sealers. 
  • Clean and etch surface using a product such as a muriatic acid etcher (read and follow all manufacturer's label directions) to achieve a textured profile similar to 150 grit sandpaper. 
  • Wipe your fingers over the clean, dry floor to check for dust or powder. Ensure there is no residue on your fingers that may have been left from the etcher. If residue is found, rinse the surface to remove residue. Allow the surface to dry completely. Sprinkle a few drops of water onto the surface. If water is quickly absorbed and the surface feels like 150 grit sandpaper,  the surface is ready. If not, re-etch. 
  • Apply a product such as BEHR PREMIUM® No. 880 Concrete and Masonry Bonding Primer to increase adhesion of topcoat to the surface. Follow all label instructions.

Read More

Application

  • DO NOT THIN. 
  • Intermix all cans of same product to ensure color uniformity. 
  • Stir stain before and occasionally during application. Use product when air and surface temperatures are between 50-90° F (10-32° C). 
  • Do not apply in direct sunlight. Apply to dry concrete. Do not apply if rain or heavy dew is expected within 24 hours. 
  • Apply stain in small concrete sections approximately 4' by 4'. Work quickly and feather edges. 
  • Apply with a high quality pump sprayer with a fine spray setting using a circular motion. Optional: After applying with pump sprayer, for a more uniform look, immediately follow with a 3/8 nap roller lightly saturated with stain. 
  • Spread rate will vary depending on the porosity and texture of the surface. 
  • NOTE: The coating will likely lighten as it dries. 
  • Allow first coat to dry before deciding if a second coat is necessary. Additional coats will help create a variegated look and may slightly darken the finish. 
  • Horizontal surfaces may be subject to premature wear. Periodic touch-ups may be necessary.

Read More

Optional Top Coat

  • For added protection, use a product such as BEHR PREMIUM® No. 985 Wet-Look Sealer for a high-gloss finish or a product such as BEHR PREMIUM® No. 986 Low-Lustre Sealer for a low-gloss finish. 
  • Allow stain at least 24 hours to dry before top coating with a clear. 
  • NOTE: Do not use Wet-Look Sealer or Low-Lustre Sealer as a topcoat around pool decks or other areas subject to moisture. Follow all label instructions.

Read More

Dry Time

  • Longer dry time required in cooler temperatures and higher humidity. Allow 24 hours for light foot traffic. 
  • Allow 72 hours before repositioning planters or furniture. 
  • After 30 days, clean as needed with a mild, non-abrasive liquid detergent.

Read More

Clean Up

  • Use soap and water. Properly dispose of all soiled rags and protect unused product from freezing. 
  • To recycle or properly dispose of product in your community, contact your household refuse collection service. 

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot