Exterior Satin Enamel Paints | BEHR ULTRA® | Behr

BEHR ULTRA® Exterior Satin Enamel

Avg. Rating:

To create a subtle touch of style that looks great on a variety of exterior surfaces, choose BEHR ULTRA Exterior Satin Enamel. This sheen will give your home's siding, trim and fences a pearl-like finish that also looks great on doors, trim and masonry.

 

*A primer coat may be needed on some surfaces. See label for details.

1 gal can of Behr Ultra Exterior paint, satin enamel

BEHR ULTRA® EXTERIOR PAINTS ARE RATED

BY CONSUMER REPORTS

View Report

Consumer Reports does not endorse products or services.

Consumer Reports Ultra Exterior Paint report Consumer Reports Ultra Exterior Paint report image for mobile

Finish

A satin sheen creates a pearl-like finish that’s durable and dirt-resistant. It will also resist moisture, fading and stains.

Best For Use In

Virtually all Exterior surfaces

Coverage

250-400 Sq. Ft. per Gallon

PRODUCT USAGE
  • Clock icon

    1 HR Dry Time 
    2 HR Recoat Time

  • Paint coverage icon.

    250-400 Sq. Ft 
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Properly prepared and cleaned coated or uncoated exterior surfaces. Ideal for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel, and Fences.

Preparation & Prime†

  • Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
  • Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
  • Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
  • Scuff sand or etch metals. Rinse and allow to dry.
  • Caulk windows, doors and other openings. Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR ULTRA™ paint as a primer for repaired or uncoated surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
  • Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR ULTRA.
  • For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR ULTRA if needed.

Read More

Application

  • Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.
  • Do not paint when rain or heavy condensation is expected.
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • On semi-smooth surfaces, use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021” spray tip, 60 mesh filter).
  • On rough surfaces, use a high quality 3/4-1” nap roller cover.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require more than one coat for complete hide.
  • On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • When applying to vinyl, color choice must be the same color or lighter than the existing color. Do not use on floors.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Visit behr.com for painting tips, expert project advice and the perfect color coordination with ColorSmart by BEHR®.

empty-paragraph

Read More

Read More

Reviews

Compare Behr Sheens

  • Stucco / Masonry / Brick
  • Siding ( Aluminum / Fiber Cement / Wood / Vinyl )
  • Doors / Windows / Shutters
  • Garage Doors / Gutters
  • Soffit / Fascia / Eaves
WARRANTY

LIFETIME LIMITED WARRANTY: Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot