AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PREMIUM® Interior/Exterior Concrete & Garage Self-Priming 1-Part Epoxy No. 900

Avg. Rating:

BEHR PREMIUM Interior/Exterior Concrete & Garage Self-Priming 1-Part Epoxy is a high-performance, ready-to-use, single-component water-based floor paint that resists hot tire pickup and marring. The finish is resistant to household type chemicals, oil, and gasoline, which reduces the need for maintenance of hard-to-clean interior or exterior floors. This durable, satin finish floor paint also resists scuffing, fading, cracking, peeling and blistering.

5 gal pail of Behr Premium Concrete and Garage 1 part epoxy

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

Satin

Best For Use In

Properly prepared interior and exterior concrete surfaces.

Coverage

300-400 sq ft per gallon depending on the application method and substrate porosity. It does not include the loss of material from spraying.

Tools & Resources

PRODUCT USAGE
  • Concrete square feet coverage icon

    Rough Surface
    300-400 Sq. Ft
    Smooth Surface
    400-500 Sq. Ft.

  • Clock icon

    1 HR
    Dry To Touch
    4-6 HR
    Recoat Time

  • Soap and water cleaning a paint brush icon

    Clean-Up
    Soap & Water

  • Thermometer Icon

    Protect
    from Freezing

Interior or Exterior surfaces such as: Porous Concrete, Masonry, Stone and Brick. Ideal for horizontal surfaces such as: Garage Floors, Driveways, Basement floors, Porches and Pool Decks. DO NOT use on vertical surfaces or areas subject to hydrostatic pressure. NOT for industrial use or areas subject to fork-lifts.

Preparation

  • Proper Surface Preparation is Required.
  • All surfaces must be clean, sound, dry and free of any dirt, oil and grease.

New and Uncoated Concrete or Masonry Surfaces:

  • Allow new surfaces to cure 30 days.
  • Clean and etch surface using a product such as a muriatic acid etcher (read and follow all manufacturer's label directions) to achieve a textured profile similar to 150 grit sandpaper.
  • Wipe your fingers over the clean, dry floor to check for dust or powder. Ensure there is no residue on your fingers that may have been left from the etcher. If residue is found, rinse the surface to remove residue. Allow the surface to dry completely. Sprinkle a few drops of water onto the surface. If water is quickly absorbed and the surface feels like 150 grit sandpaper, the surface is ready. If not, re-etch.
  • Apply a Primer Coat: Apply 1 coat of BEHR PREMIUM® Concrete & Garage Self-Priming 1-Part Epoxy, or a product such as BEHR PREMIUM No. 880 Concrete & Masonry Bonding Primer to increase adhesion of topcoat to the surface.

Painted, Stained or Sealed Concrete:

  • For a painted surface in sound condition, use a product to clean and prepare the surface.
  • If the coating is failing or peeling, use a paint stripper to remove old coating or scrape/sand down to a sound concrete surface.
  • Scuff sand glossy surfaces.
  • Clean and spot etch any exposed concrete. Remove all dust with a damp cloth, allow to dry.
  • Spot prime all bare concrete areas with BEHR PREMIUM Concrete & Garage Self-Priming 1-Part Epoxy or with a product such as BEHR PREMIUM No. 880 Concrete & Masonry Bonding Primer to increase adhesion of topcoat to the surface.

Read More

Application

  • DO NOT THIN.
  • Intermix all cans of same product to ensure color uniformity.
  • Stir before and occasionally during application. Use product when air and surface temperatures are between 50-90° F (10-32° C).
  • Apply to dry concrete. Do not apply if rain or heavy dew is expected within 24 hours.
  • Apply a thin, even coat using a 3/8" nap roller cover, nylon/polyester brush or an airless sprayer (.015"-.021" spray tip, 60 mesh filter).
  • Allow first coat to dry before deciding if a second coat is necessary. Additional coats may be required for optimal hide and durability.
  • For uniformity apply second coat in a criss-cross pattern.
  • An annual touch-up may be required in areas subject to tire traffic.

Read More

Dry Time

  • Longer dry time required in cooler temperatures and in higher humidity.
  • The floor may be subjected to light foot traffic after 24 hours.
  • Allow 72 hours before subjecting surface to heavy foot traffic or repositioning furniture.
  • Allow 7 days before subjecting to automotive tires.
  • Premature heavy traffic will cause paint failure requiring spot recoating.
  • If necessary, corrugated cardboard may be used underneath automobile tires after 72 hours.
  • Wait at least 30 days before rinsing or cleaning. Use a mild detergent as needed.
  • Abrasive cleaners and pressure-washers should be used carefully to avoid premature paint failure.

Read More

Disposal

  • Properly dispose of all soiled rags.
  • To recycle or properly dispose of product in your community, contact your household refuse collection service.

Read More

Read More

WARRANTY

LIMITED WARRANTY

For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot