How-to Apply Low Lustre Sealer on your Project | Behr

How to Apply BEHR PREMIUM® Low Lustre Sealer

Add a beautiful, protective finish to your home's concrete and masonry surfaces.

For Best Results:

Surfaces must be properly cleaned and prepped before applying the sealer.

For new or uncoated surfaces, refer to: Preparation of Uncoated Concrete for Sealers 

For uncoated pavers, brick or natural stone, refer to: Preparation of Uncoated Pavers, Brick or Natural Stone

For coated concrete: refer to: Preparation of Coated Concrete for Sealers

Suggested Tools & Supplies
  • Broom (Stiff Bristle)
  • Rags
  • Scrub Brush
  • Protective Apparel
  • Chemical Resistant Gloves
  • High Pressure Nozzle

  • Mop
  • Brush (Nylon/Polyester)
  • Roller Cover and Frame
  • Pump Sprayer
  • Pad Applicator
  • Step 1

    After the surface is cleaned and prepped, apply a thin coat of BEHR PREMIUM® Low-Lustre Sealer with either a nylon-polyester brush, 1/4 - 3/8" nap roller, high quality pad applicator, or a high quality pump sprayer with an adjustable tip.

    TIP: The spread rate is 200-450 sq ft per gal. Use when air and surface temperatures are between 50-80 degrees F. Do not apply in direct sunlight, on wet surfaces, or if rain or heavy dew is expected within 24 hrs.

  • Step 2

    If the sealer is sprayed, then back roll for uniform thickness. For added durability,additional coats (no more than 4) may be applied.

    TIP: Annual touch up may be required in areas subject to tire traffic.

  • Step 3

    The sealer will dry to the touch in 1 hour.  Allow the first coat to dry for 4 hrs. before deciding if a second coat is needed.

  • Step 4

    Be sure that the surface is fully cured before use.
    Allow 24 hours for light foot traffic.
    Allow 72 hours for heavy foot traffic and furniture.
    Allow 14 days before subjecting to automotive tires.
    Allow 30 days before rinsing and cleaning with a mild detergent.

ADDITIONAL RESOURCES
Orange calculator icon in a white bubble

PAINT AND STAIN CALCULATOR

Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.

Calculate

ASK AN EXPERT

Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.

Get Expert Help

CONNECT WITH PRO REFERRAL - POWERED BY THE HOME DEPOT

Let Pro Referral do the leg work and match you with quality local painters.

Find a Painter
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot