How-to Prepare Uncoated Pavers, Brick or Stone | Behr

Preparation of Uncoated Pavers, Brick or Natural Stone

A great looking finish begins with the right start. Following the proper prep procedures will dramatically affect the look and longevity of your finished project.

For Best Results:

For expert guidance on prepping your uncoated pavers, brick or natural stone surfaces, refer to our how-to steps below.

For your safety, please wear protective clothing, eye goggles, and acid-resistant rubber gloves and footwear.

Suggested Tools & Supplies
  • Broom (Stiff Bristle)
  • Rags
  • Scrub Brush
  • Protective Apparel
  • Hose
  • Chemical Resistant Gloves
  • High Pressure Nozzle

  • Mop
  • Step 1

    Make sure the surface is clean. Wipe up all excess oil and grease spills. Scrape and sweep away dirt and other loose contaminants from the surface.

  • Step 2

    Clean and degrease the surface using a plastic watering can. This will evenly distribute the product. Work the Degreaser and Cleaner into the surface using a stiff bristled, non-metal brush or broom. Allow the product to remain on the surface for 10-20 minutes then vigorously scrub the surface. DO NOT allow the surface to dry.

  • Step 3

    Rinse the surface thoroughly with fresh water, while scrubbing at the same time to properly remove remaining residue. Pressure wash for best results.

    TIP: After application, thoroughly saturate surrounding grass and plants with fresh water.

  • Step 4

    Remove excess water with a non-metal squeegee or mop. Prevent all rinse solution from entering the storm drains. Once the surface is clean and dry, it can be sealed.

ADDITIONAL RESOURCES
Orange calculator icon in a white bubble

PAINT AND STAIN CALCULATOR

Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.

Calculate

ASK AN EXPERT

Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.

Get Expert Help

CONNECT WITH PRO REFERRAL - POWERED BY THE HOME DEPOT

Let Pro Referral do the leg work and match you with quality local painters.

Find a Painter
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot