How-to Apply Protector and Waterproofer | Behr

How To Apply BEHR PREMIUM® Protector and Waterproofer

Protect your surfaces from corrosion, spalling, efflorescence and freeze-thaw damage with our premium waterproofer.

For Best Results:

Make sure your surface is cleaned and prepped before applying the waterproofer. 
For new or uncoated surfaces, refer to: Preparation of Uncoated Concrete for Sealers 

For uncoated pavers, brick or natural stone, refer to: Preparation of Uncoated Pavers, Brick or Natural Stone

For coated concrete: refer to: Preparation of Coated Concrete for Sealers

Suggested Tools & Supplies
  • Broom (Stiff Bristle)
  • Rags
  • Scrub Brush
  • Protective Apparel
  • Hose
  • Chemical Resistant Gloves
  • High Pressure Nozzle

  • Mop
  • Step 1

    After the surface is cleaned and prepped, apply the BEHR PREMIUM® Protector and Waterproofer until the surface is saturated. Apply the product to a dry surface with a brush, roller or garden sprayer.

    TIP: The spread rate is 250 sq. ft per gallon. Use when air and surface temperatures are between 50-90 degrees F. Do not apply in direct sunlight, on wet surfaces, or if rain or heavy dew is expected within 24 hrs.

  • Step 2

    Remove any puddles by spreading product to drier areas or by wiping off excess with a clean cloth.

  • Step 3

    On vertical surfaces, apply the waterproofer from the bottom up and saturate thoroughly.

    TIP: The Proterctor and Waterproofer will cure within 24-48 hrs.

  • Step 4

    Once dried, rough, vertical surface may be coated with an oil or latex-based paint or primer. DO NOT paint horizontal surfaces after applying this product.

    Clean up with soap and water.

ADDITIONAL RESOURCES
Orange calculator icon in a white bubble

PAINT AND STAIN CALCULATOR

Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.

Calculate

ASK AN EXPERT

Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.

Get Expert Help

CONNECT WITH PRO REFERRAL - POWERED BY THE HOME DEPOT

Let Pro Referral do the leg work and match you with quality local painters.

Find a Painter
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot